However, Huawei still uses non-standard AT commands for dialing the LTE connection, so the support in LEDE was limited - specifically, the modem did not report the external IP address back to LEDE, which seems to be necessary for NAT loopback. I then tried to flash a different firmware that converts the Huawei to a "normal" NCM modem. So in this case the problem was a "double NAT", which apparently is a no-go for NAT loopback. The LTE modem is a Huawei E3372, which has special firmware (HiLink) that makes it appear as an ethernet adapter, and also contains a complete router with NAT. It turns out that the LTE modem I was using was the cause of the problem. etc/config/network, /etc/config/firewall, iptables-save dumps can be found hereįollow up: I got it working. Isn't this what NAT loopback is supposed to do?Īny tips how I could get OpenWRT/LEDE to do this like I want? I tried using the hosts file, but this only respects one server IP at a time, which is undesirable.įrom LAN, both 79.12.23.40:80 and 79.12.23.40:5000 should point to the respective server IPs. When I try to access ports 80 or 443, I get a 'connection refused' error. The DynDNS address does not work from inside the LAN, though. I have set up a DynDNS service - everything works fine when the request originates in the WAN zone. I want to use the WAN IP to access these port forwards both from the WAN and LAN side. Apache and SSH on one server, but a game on another server). I have been trying to set up port forwards through the LuCI interface to multiple servers in the LAN network (e.g.
#Nat loopback merlin download
With this in mind, download AsusWrt-Merlin Router Firmware 380.67 Beta 1 for your specific device, apply it, and constantly check our website to stay informed when newer versions are available for your device.Hi, I could use some help setting up port forwarding on LEDE 17.01.4 r3560. Also, to avoid any problems and malfunctions, make sure not to interrupt this process in any way.
#Nat loopback merlin upgrade
trx file, click “Upload,” and wait patiently as the upgrade is performed. Therefore, if supported, save the appropriate package for your device model, unzip it, establish a wired connection between the router and your computer, and go to Advanced Settings > Administration > Firmware Upgrade.Īfterward, near the “New Firmware File” section, hit “Choose File” button, navigate and select the. If you intend to make use of these improvements, first know that the developer has provided installation files compatible with ASUS’ RT-N66, RT-AC88U, RT-AC87, RT-AC68, RT-AC66, RT-AC56, RT-AC1900, RT-AC3100, RT-AC3200, and RT-AC5300 routers. Moving forward, Merlin has also managed to resolve UPNP, SNMP, NAT Loopback issues in Dual WAN mode, limit the number of supported OpenVPN clients to 2 on the RT-AC3200 (saves NVRAM), and implement several changes highlighted in the Release Notes below. In addition to that, the present release updates miniDLNA (1.2.0), nano (2.8.4), OpenSSL (1.0.2l), IPSet ARM (6.32), and vsFTPd (3.0.3) versions, moves SMB2 support switch to the main Samba page, and optimizes all webUI images for size. AsusWrt-Merlin has announced the availability of a new firmware package targeted at several ASUS router models, namely version 380.67 Beta 1, which merges with GPL 380_7743 code, adds custom config support for quagga/ ripd, and allows saving webUI SSL certificates.
0 kommentar(er)
